@PETUR: yes, you are right: my remaining problems had been caused by external reasons.
Thank you for your great help !!
fafot |
It looks like the Flukso site is down again.
fafot |
Update: The site was down for 24 minutes, and it's up again. No used energy was recorded during this time.
Fluc |
Nothing to see here about missing recordings, at what time (GMT) this happen on the august 11 2024 (today) ?
fafot |
Sorry for late answer. I did not check this thread for a while...
After checking the Flukso group on the PVoutput, https://www.pvoutput.org/outputs.jsp?dt=20240812&tid=860
I realized that it is only my system problem. I checked the solar sensor with a voltmeter and it was dead.
Ordered new one but in the meantime, after 3 days the old sensor started working...
Since then it works without any problems.
So now I have the new sensor and waiting for the old one to die :)
Very unusual !!!
petur |
Now my FLM3 stopped publishing data on flukso.net while the FLM2 works.
Stopped on Saturday 25/4
I wonder if it's the same certificate issue as FLM2 had... Anybody else with the same issue?
(just to rule out it is just my device failing)
Heartbeats work fine so it does smell like the same issue
adamcowin |
Mine appears to have stopped publishing on flukso.net as well - though it is a FLM2 unit.
It is uploading to pvoutput.org still and I can view the device locally (with the modified web interface, to show consumption visualation
The FLM2 is still going strong though - ordered in 2014 and still running without any issues 12 years later. Very impressive and a testimate to Barts work. I still stop by flukso.net every now and then, but its like a ghost town now.
Does anyone know what happened, obviously the site is stil running but no updates for years
petur |
Looks like Bart renewed the site certificate and the reason the FLM3 wasn't pushing to flukso.net was for that certificate, so all working again now.
I didn't find (yet) how to patch FLM3 like I did for FLM2, but I should really start logging myself and use Grafana locally.
petur |
@adamcowin there's patch in this thread (page 2) for FLM2, did you try it?
@PETUR: yes, you are right: my remaining problems had been caused by external reasons.
Thank you for your great help !!
It looks like the Flukso site is down again.
Update: The site was down for 24 minutes, and it's up again. No used energy was recorded during this time.
Nothing to see here about missing recordings, at what time (GMT) this happen on the august 11 2024 (today) ?
Sorry for late answer. I did not check this thread for a while...
After checking the Flukso group on the PVoutput,
https://www.pvoutput.org/outputs.jsp?dt=20240812&tid=860
I realized that it is only my system problem. I checked the solar sensor with a voltmeter and it was dead.
Ordered new one but in the meantime, after 3 days the old sensor started working...
Since then it works without any problems.
So now I have the new sensor and waiting for the old one to die :)
Very unusual !!!
Now my FLM3 stopped publishing data on flukso.net while the FLM2 works.
Stopped on Saturday 25/4
I wonder if it's the same certificate issue as FLM2 had... Anybody else with the same issue?
(just to rule out it is just my device failing)
Heartbeats work fine so it does smell like the same issue
Mine appears to have stopped publishing on flukso.net as well - though it is a FLM2 unit.
It is uploading to pvoutput.org still and I can view the device locally (with the modified web interface, to show consumption visualation
The FLM2 is still going strong though - ordered in 2014 and still running without any issues 12 years later. Very impressive and a testimate to Barts work. I still stop by flukso.net every now and then, but its like a ghost town now.
Does anyone know what happened, obviously the site is stil running but no updates for years
Looks like Bart renewed the site certificate and the reason the FLM3 wasn't pushing to flukso.net was for that certificate, so all working again now.
I didn't find (yet) how to patch FLM3 like I did for FLM2, but I should really start logging myself and use Grafana locally.
@adamcowin there's patch in this thread (page 2) for FLM2, did you try it?