Schlumberger G4 RF1

by daerts on Thu, 13/09/2012 - 18:36

Hi,
did anyone manage to get the gas sensor working on a Schlumberger G4 RF1 meter? (see photos)
Thanks

Attachment	Size
2012-09-13 19.19.52.jpg	1.16 MB
2012-09-13 19.20.09.jpg	1.01 MB

on3ptz | Fri, 14/09/2012 - 07:32

Try placing it more in the center, i think i also used smaller sensors ....

gebhardm | Fri, 14/09/2012 - 08:13

The first picture already says it, where the magnet is: Impulse per 0.1 m^3; correspondingly the magnet is on the first after-comma digit; thus ON3PTZ is right to place the reed switch a bit more to be mid... A look at the documents linked in https://www.flukso.net/content/g4-rf1-gas-meter could have also revealed that there are meters with magnets on different pulleys - has the majority of people unlearned to experiment? scratch and wonder...

gebhardm | Fri, 14/09/2012 - 08:21

To be fair and also post an English version of the meter spec: http://heathungary.hu/doc/text/actaris_g4rf1_angol.pdf

on3ptz | Sat, 15/09/2012 - 19:43

A impulse every 0.1m3 is not much, you can test the sensor the first time with a digital volt meter.