As mentioned in the related forum post [1], there's an IETF energy management working group defining a standard MIB. I guess that any SNMP-based sensor access to the FLM should ideally be based on such a standard.
Do you have a concrete use case for SNMP-based data access?
I've my own panel to graph data, based on Collectd, and I'm pooling several equipments by SNMP.
Having a SNMP access would provide native access to fluksometer data for all application talking SNMP.
Regards,
Cyril
feraudet |
I've tried to install snmpd-static on my Fluksometer, but opkg install process cause immediate reboot.
Hi Cyril,
As mentioned in the related forum post [1], there's an IETF energy management working group defining a standard MIB. I guess that any SNMP-based sensor access to the FLM should ideally be based on such a standard.
Do you have a concrete use case for SNMP-based data access?
[1] https://www.flukso.net/content/snmp-oid
[2] http://tools.ietf.org/html/draft-tychon-eman-applicability-statement-05
Cheers,
Bart.
Hi Bart,
I've my own panel to graph data, based on Collectd, and I'm pooling several equipments by SNMP.
Having a SNMP access would provide native access to fluksometer data for all application talking SNMP.
Regards,
Cyril
I've tried to install snmpd-static on my Fluksometer, but opkg install process cause immediate reboot.
Maybe it ran out of memory ?
Regards,
Cyril
Hi Cyril,
This is probably due to you first running
Try installing the package directly, e.g.
Cheers,
-Bart.