Hi,

I'm working on a project with a dutch smart meter. We are trying to make connection between a flukso FLM 02 and the smart meter, to create a external connection.

We want to use the use the P1 poort from the meter an connect it with the analog port. For this we use a regular RJ45 cable,but we don't know which wire should be connected with which analog input port.

I know it would probably be easier if i just use the Ethernet gate, but doesn't seem to work either.
I hope the question is clear enough for you to help me.

Kind regards

Hi,
is it possible to use sensor port #3 or #6 to connect my pulse water metering wires?
The two ports #4 & #5 are already busy with two electric pulse metering.
The #3 is devoted to analog electric metering, and the #6 is for uart (?).
Louis

Here is the 8th occurrence of a barcamp for tinkerers and energy management enthusiasts to take place in Leuven/Belgium, April 25/26; see http://developer.mysmartgrid.de/doku.php?id=ec1404-coordination

I've been noticing something weird lately... I'm keeping an eye on my IT-related power usage (read: put a clamp on its circuit), and I notice that my base load (night) graph sometimes gets it wrong.

Last night between midnight and 7 in the morning, my hourly readings ripple between 98 and 100 watts, yet my night reading for that circuit says 116 watts.

Surely that reading should never be above 100 watts? Calculation issue or some other hidden cause?

Could you provide application note on building and setup guide from scratch of fls.