Hi I just received my flukso but encounters some bugs connecting to the KAIFA 2014 (version 0040??)
The (total) power usage is visible in DASH but only for the used not the produced power since the graph doesn’t support negative values or split the used and produced values ( T+ and T1 in the KAIFA screen )
The smart gas meter values aren’t visible gives a blank screen
The minute function gives an error (not same local network .. but is is )
Any suggestions where to check for the received measurements using SSH ?
Ps,
Remote access via wifi wasn't possible till I used the suggested ssh fix in this forum THANKS!
Met grote groet,
Adriaan
"Any suggestions where to check for the received measurements using SSH ?" - not SSH (only the syslog in the web client shows what was measures), but MQTT; see https://www.flukso.net/content/mqtt-mq-telemetry-transport
"The minute function gives an error (not same local network .. but is is )" - this is a mixed content issue; lengthy discussion in https://www.flukso.net/content/minute-tab-flm02b-anyone-got-it-working-yet
The rest is subject to an answer by icarus75...
MQTT up and running ( MQTT-FX and MYMQTT ) still only current power and cummulative power ... no gas readings ... patiently waiting for icarus75 ...tomtidomtiedom
Minute issue "solved" by accepting the unsecure local meter readings ( click shield in chrome browser ;-)
Thanks GEBHARDM!
MQTT up and running ( MQTT-FX and MYMQTT ) still only current power and cummulative power ... no gas readings ... patiently waiting for icarus75 ...tomtidomtiedom
Minute issue "solved" by accepting the unsecure local meter readings ( click shield in chrome browser ;-)
Thanks GEBHARDM!
Cross ref with Bart's post, containing 'permanent' solution: https://www.flukso.net/content/uninstalled-smart-main-sensors-reason-non...
The smart meters cannot break out gross production and consumption, only net insertion into/extraction from the grid. The dash does indeed not go negative at the moment, that'll be fixed next time we update the charting. Negative values will be displayed when hoovering over the chart however.
Thanks ICARUS75,
Is there an update for the Landis + Gyr 2014 GAS meter ?
This is still not working via the P1 port is there ant thing I could alter or measure ?
Okay I finally figured out what was the issue whit the missing gas meter readings.
I installed the free app “anna inzicht” there I learn that there was no gas reading either.
Called the “net beheerder” who forgot to connect the smart gas meter.
After rebooting fluxo the gas sensor was added and some of the readings are shown in “MTRG/DASH”