can i ask what weather station you have setup in pvoutput? my temp is only updated every 15 mins so its the same temp for 3 5 min intervals and graph looks all jumpy but yours is nice and smooth
B-Man |
also noticed yours didn't have any generation at all. for that day did something else go wrong?
bazzle |
No other issues at the time. WiFi ok, internet ok.
World symbol went out and didnt come back for about 12 hrs.
My temperature on PVoutput picks up from a local weatherstation under additional settings,, Scoresby is the closest in my case.
I used to use Weatherunderground but that stopped working.
B-Man |
i have my local weather station set there but from what i can read i have to have the Weatherunderground setup aswell to get live readings.
"BOM station for daily temperatures, for live data use a wunderground weather station below"
i guess my weather station only seems to update every 15 minutes where yours appears to be every 5.
bazzle |
I also donate a small amount to get the extra fields for water and gas etc. I 'think' that changes reporting times BUT 15 mins is more than enough.
B-Man |
i donate too to get extra data. but that has no bearing.
was nice looking over your system with a smooth temp graph vs mine
bazzle |
Ive just checked my settings. I still have Weatherunderground API etc in the fields.
"Maybe" its still working?
Not going to unlink to test ......
B-Man |
yeah i think what happened is anyone that got an API is still fine they are just not handing out new API's
and old ones are meant to still work
bazzle |
Was down again today, 7am to 3pm Oz time.
When it came up it didnt fill in lost data :(
thankfully pvoutput seems to have picked up cached my data
B-Man |
yes mine was down as well. i check your pvoutput bazzle and figured flukso was down. luckily it uploaded all my data into pvoutput when it come good.
i know if you power off the flukso it wont fill it in. did you happen to lose power or turn off the flukso?
it would be nice if it could temp store any data and fill it in even if you turn it off.
it seems to be dropping out more lately. i have a fronius inverter so looking at setting that up to read my consumption aswell then the flukso will only do my hot water readings and a few water meters. would be nice to bypass the flukso website and upload directly to pvoutput to combat these issues but i have noidea where to start. nor the time to do it
Wizzopa |
And still no reaction from @icarus75
bazzle |
I removed power and reapplied to check it wasn't at my end.
Maybe that's why I lost a day of data...sad.
icarus75 |
See my comment on a related thread. Closing this one.
didn't notice it my end
Haven't noticed any hiccups either.
can i ask what weather station you have setup in pvoutput? my temp is only updated every 15 mins so its the same temp for 3 5 min intervals and graph looks all jumpy but yours is nice and smooth
also noticed yours didn't have any generation at all. for that day did something else go wrong?
No other issues at the time. WiFi ok, internet ok.
World symbol went out and didnt come back for about 12 hrs.
My temperature on PVoutput picks up from a local weatherstation under additional settings,, Scoresby is the closest in my case.
I used to use Weatherunderground but that stopped working.
i have my local weather station set there but from what i can read i have to have the Weatherunderground setup aswell to get live readings.
"BOM station for daily temperatures, for live data use a wunderground weather station below"
i guess my weather station only seems to update every 15 minutes where yours appears to be every 5.
I also donate a small amount to get the extra fields for water and gas etc. I 'think' that changes reporting times BUT 15 mins is more than enough.
i donate too to get extra data. but that has no bearing.
was nice looking over your system with a smooth temp graph vs mine
Ive just checked my settings. I still have Weatherunderground API etc in the fields.
"Maybe" its still working?
Not going to unlink to test ......
yeah i think what happened is anyone that got an API is still fine they are just not handing out new API's
and old ones are meant to still work
Was down again today, 7am to 3pm Oz time.
When it came up it didnt fill in lost data :(
http://www.isitdownrightnow.com/flukso.net.html showed it down also.
thankfully pvoutput seems to have picked up cached my data
yes mine was down as well. i check your pvoutput bazzle and figured flukso was down. luckily it uploaded all my data into pvoutput when it come good.
i know if you power off the flukso it wont fill it in. did you happen to lose power or turn off the flukso?
it would be nice if it could temp store any data and fill it in even if you turn it off.
it seems to be dropping out more lately. i have a fronius inverter so looking at setting that up to read my consumption aswell then the flukso will only do my hot water readings and a few water meters. would be nice to bypass the flukso website and upload directly to pvoutput to combat these issues but i have noidea where to start. nor the time to do it
And still no reaction from @icarus75
I removed power and reapplied to check it wasn't at my end.
Maybe that's why I lost a day of data...sad.
See my comment on a related thread. Closing this one.