Hi,

I'm a Flukso newbie but quite interested in the stuff you are doing and would like to get a better understanding of the Fluksometer. I looked at the sources from GitHub and came across two questions:

1. How is the flukso daemon implemented, where can I find it in the source?
2. Is there somewhere a documentation of the JSON/REST API which the Fluksometer uses to report the measurements to the Flukso server?

Best regards,
Brian

Hi,
I use the following S0-Counter Energy in connection with the Flukso:
DRS155D - 230V
Compatible with "S0" Din-Rail 43 864 standard (27V, 27mA)
http://www.bg-etech.de/index.php?view=article&id=46%3Adrs155d&format=pdf ...
- Incl. S0 port 1000 Imp / kWh (t = 90ms)
- Compatible with "S0" Din-Rail 43 864 standard (27V, 27mA)
DSZ80 - 400 V
http://www.bg-etech.de/index.php?view=article&id=54%3Adsz80&format=pdf & o. ..
- pulse width: 90ms
- Counts: 1000imp/kWh
In the phase meter no DIN standard was reported.

Is there any information available about when the new hardware might be available for purchase?

Hi Bart,
just downloaded and checked through your Sensorboard v2 design 2.1
12.11.2010 5:05 in Eagle.

(maybe, it's just an unfinished symphony, don't know, please don't be
offended if so)

On the Router-Connector, you have the three pins 13, 15 and 16 connected
to the Nets RAW, AR_TXO and AR_TXI

Shouldn't they be connected to TXO and RXI respectively?

At the moment, there are no connections on the board! Also, RAW isn't
connected anywhere!

Also, please confirm / tell me wrong:

COLD is used to cold-reset the atheros from atmega

Cheers everybody.
This goes to let everybody know, that some 5 fearless knights from southwest germany set out to repurpose the fluksometer.