Cannopt upgrade from Ver 247 to 250

by fafot on Mon, 10/09/2018 - 07:21

I pressed the upgrade button under devices to upgrade my Flukso FL03001461 from Ver 247 to 250 but it doesn't want to upgrade itself.
Here is the data after pressing upgrade:

The FLM with serial FL03001461 will be upgraded to firmware version 250 at the next FLM heartbeat.

Serial Version Resets Last heartbeat Uptime Operations
FL03001461 250** 57 07 Sep 2018 14:01:07 0d 19h

Here are the readings an hour & 10 min later after the next heartbeat:
Serial Version Resets Last heartbeat Uptime Operations
FL03001461 247 57 07 Sep 2018 15:01:15 0d 20h remove upgrade

I did it number of times over the weekend. Still the same ver 247 without the upgrade.
Any ideas?

PhilippeG | Sun, 16/02/2020 - 12:06

Is your upgrade completed ?
I have the same issue currently

PhilippeG | Sun, 16/02/2020 - 12:17

Upgrade succeeded after updating sensor list :-)

hero | Wed, 19/02/2020 - 13:00

What do you mean by updating the sensorlist?
I have a similar issue with the update.

vk2him | Thu, 20/02/2020 - 10:36

I've managed to upgrade to v250 manually - see instructions here:

https://www.flukso.net/content/flukso-update-problem-after-bricked