How can I get the flukso to reset the ethernet connection after the internet router was down due to a power failure? I've waited a day, but is does not connect anymore.
There are several options:
* Power cycle the router once more
* In the router setup initiate an IP lease cycle (refresh connections - probably not all models support this)
* Pull the FLM's ethernet cable and reattach after 10 sec
* Power cycle the FLM (pull the power cable, wait 10 sec and reattach it to force a hard reboot)
DriekdeGadgetfreak |
Thanx! Pulling the ethernet cable seems to me te best option: not all data will be lost.
There are several options:
* Power cycle the router once more
* In the router setup initiate an IP lease cycle (refresh connections - probably not all models support this)
* Pull the FLM's ethernet cable and reattach after 10 sec
* Power cycle the FLM (pull the power cable, wait 10 sec and reattach it to force a hard reboot)
Thanx! Pulling the ethernet cable seems to me te best option: not all data will be lost.
Thanx,
Hans
If you are not already on firmware v244 or v245 I hope icarus75 makes this quickly standard - then you won't loose any data as it is persisted "onboard" - see TMPO https://www.flukso.net/content/time-series-file-format-fluksometer