I have a Few issues

I have 1 water meter with a pulse counter connected atm
its a 10L per pulse yet my graph shows it as using 1 or 2 liters etc.
Constant set at 10

how when its a 10L/pulse?

https://www.dropbox.com/s/nzdscd6n8zreg35/10L.p.PNG?dl=0

i can understand it averages it from the last pulse to the current one but its graphing it all wrong, when it varies a few liters here and there up and down but hasnt actually used 10L
unless im getting my constant wrong i dont know whats going on

imo it should average the usage from the pulse before to the pulse after i dont know how it can get readings inbetween the pulses

i have 2 more water meters one a 5l/Pulse that gives random pulse readings
ie. i test with air the meter will read 100L used and the flukso graph shows 36L
i test again and do another 100L and flukso graph shows 56L?

i set the constant to 1 so it would count pulses and i could work out if it was infact a 5L/Pulse unit but the pulses are way out with the same usage.

and the other one is a 0.5L/pulse that wont even get a pulse.

are they not compatible with the flukso or is something else wrong?
or is air (that still spins the meter some how affecting it? i dont want to plumb it all up then it not work and be stuck

My old FLUKSO died last year and my friend had a new one that he never got around to installing so he gave it to me. I have followed the installation steps for wi-fi. The wi-fi light is flashing, the heart beat light is flashing and the globe light is on. I have plugged it into the sensors from the previous FLUKSO. When I go to register at www.flukso.net/user/register my browser comes up with a message that I am not authorised to access this page. I have an old FLUKSO account that I am currently using but I can't see any readings on Dash. Any suggestions on how I can get the FLUKSO working properly? Thanks.

I was wondering if it is possible to use sysupgrade for upgrading the device. I haven't found any firmware image to download.

Hi,

I just set my Flukso up today but I am not getting any data showing in the dash.
I have re-enabled the sensor a few times, I even setup a second one to try and work out the issue.

Here is my log -

Mar 23 06:00:01 flukso-2b53c0 cron.info crond[672]: crond: USER root pid 1477 cmd /usr/bin/fcheck
Mar 23 06:15:01 flukso-2b53c0 cron.info crond[672]: crond: USER root pid 1549 cmd /usr/bin/fcheck
Mar 23 06:17:56 flukso-2b53c0 daemon.info avahi-daemon[772]: Files changed, reloading.
Mar 23 06:17:57 flukso-2b53c0 user.info fsync[1573]: fsync exit status: 0, successful
Mar 23 06:17:58 flukso-2b53c0 daemon.info tmpod[1439]: Caught a SIGTERM. Exiting...
Mar 23 06:17:58 flukso-2b53c0 daemon.info fluksod[1436]: Caught a SIGTERM. Exiting...
Mar 23 06:17:59 flukso-2b53c0 daemon.info spid[1433]: Caught a SIGTERM. Exiting...
Mar 23 06:18:00 flukso-2b53c0 daemon.info supd[1430]: Caught a SIGTERM. Exiting...
Mar 23 06:18:01 flukso-2b53c0 daemon.info supd[1595]: Sucessfully started with DEAMON=supd and DAEMON_PATH=/var/run/supd
Mar 23 06:18:02 flukso-2b53c0 daemon.info spid[1599]: Sucessfully started with DEAMON=spid and DAEMON_PATH=/var/run/spid
Mar 23 06:18:02 flukso-2b53c0 daemon.info fluksod[1602]: Sucessfully started with DEAMON=fluksod and DAEMON_PATH=/var/run/fluksod
Mar 23 06:18:02 flukso-2b53c0 daemon.info tmpod[1605]: Sucessfully started with DEAMON=tmpod and DAEMON_PATH=/var/run/tmpod
Mar 23 06:18:11 flukso-2b53c0 user.info heartbeat[1609]: POST https://api.flukso.net/device/2b53c0d55c73e32723e91f12d4b5638b: 200
Mar 23 06:24:23 flukso-2b53c0 daemon.notice netifd: wan (671): Sending renew...
Mar 23 06:24:23 flukso-2b53c0 daemon.notice netifd: wan (671): Lease of 10.0.0.80 obtained, lease time 7200
Mar 23 06:30:01 flukso-2b53c0 cron.info crond[672]: crond: USER root pid 1647 cmd /usr/bin/fcheck

MQTT shows -
1458715056: /sensor/cbceceeee52e6b2d575face64800d233/gauge ~> [1458715056,0,"W"]
1458715055: /sensor/f07e46b825edc1915c7cd15393f81432/gauge ~> [1458715055,0,"W"]
1458715055: /sensor/cbceceeee52e6b2d575face64800d233/gauge ~> [1458715055,0,"W"]

and is constantly posting new lines.

Currently my Fluksometer v2b is gathering data from 3 current clamps, 1 gas clamp and 1 water clamp. I'd like to add more power clamps, there seem to be a free slot on the Fluksometer interface (black latch on the side), but I'm not sure the software supports it.

So before I dive in the software, I thought I'd just ask around first :-)