Hi

I've just received and "installed" the Fluksometer. Really, I'm trying to test it first meassuring the EE consumption of one individual appliance.

I'm using a 50A clamp and 230V in my sensor nº1...

The problem is that, you can see in the file attached, Fluksometer indication is 11 W ... but the real data (Current Cost's EnviR meassure) is really about 145 W .

The Fluksometer read ... it live... and the voltage output from the clamp is 8.3 mV.

Any idea to explain this strange behaviour?

Best regards and thank you in advance

Pedro

i have a new flukso meter we dont have internet connection at the club where we use it so i use my mobile phone as a acces point
so the first time i make a wiffi connection everithing works great but when i set off the phone and try it a halve houre later there is a wiffi connection and a heartbeat but the globe led wont turn on and no data is send to the flukso server i wait for 15 min with the phone on nothing happens but the i get the power connector out of the flm end then every thing is working fine until i turn off the phone and try it again after 15 min what do i wrong

i got the flukso v2 running yesterday and everything worked great (hour view, day view, ...), even the minute feature,

switched a few lights and everything got registered perfect,

a few moments later the minute view stopped, when i click it again it says:

×Error - The call for sensor verbruik3 experienced a timeout. You are probably not in the same local network as the FLM.

today it didn't work until half an hour ago, then it suddenly worked, but now it isn't working anymore,

didn't change antything, tried different browsers, chrome, internet explorer, firefox, ...

i tried the special command for chrome to load insecure content.. but nothing

also i can't get into the flukso anymore, with laptop hooked up to the same router i can't ping it or find the device when i use ipconfig in command, when i try 192.168.255.1 it looks like your getting into the flukso but then it says it can't find the page

all led lights are on but no measurements

System log:

Jan 1 00:00:58 flukso-3755a7 user.notice root: starting ntpclient
Feb 19 08:57:53 flukso-3755a7 user.info sysinit: Loading includes
Feb 19 08:57:53 flukso-3755a7 user.info sysinit: Optimizing conntrack
Feb 19 08:57:54 flukso-3755a7 user.info sysinit: Loading interfaces
Feb 19 08:57:54 flukso-3755a7 user.info firewall: adding wan (ath0) to zone wan
Feb 19 08:57:57 flukso-3755a7 user.info firewall: adding lan (eth0) to zone lan
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Found user 'nobody' (UID 65534) and group 'nogroup' (GID 65534).
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Successfully dropped root privileges.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: avahi-daemon 0.6.29 starting up.
Feb 19 08:58:00 flukso-3755a7 daemon.warn avahi-daemon[930]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Feb 19 08:58:00 flukso-3755a7 daemon.warn avahi-daemon[930]: Failed to initialize inotify: Function not implemented
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Loading service file /etc/avahi/services/flukso.service.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Loading service file /etc/avahi/services/http.service.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Loading service file /etc/avahi/services/ssh.service.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Joining mDNS multicast group on interface ath0.IPv4 with address 172.16.210.117.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: New relevant interface ath0.IPv4 for mDNS.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.255.1.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: New relevant interface eth0.IPv4 for mDNS.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Network interface enumeration completed.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Registering new address record for 172.16.210.117 on ath0.IPv4.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Registering new address record for 192.168.255.1 on eth0.IPv4.
Feb 19 08:58:00 flukso-3755a7 daemon.info avahi-daemon[930]: Registering HINFO record with values 'MIPS'/'LINUX'.
Feb 19 08:58:01 flukso-3755a7 cron.info crond[937]: crond: crond (busybox 1.15.3) started, log level 1
Feb 19 08:58:02 flukso-3755a7 daemon.info avahi-daemon[930]: Server startup complete. Host name is flukso-3755a7.local. Local service cookie is 1240110342.
Feb 19 08:58:02 flukso-3755a7 authpriv.info dropbear[944]: Running in background
Feb 19 08:58:03 flukso-3755a7 daemon.info avahi-daemon[930]: Service "Secure Shell on flukso-3755a7" (/etc/avahi/services/ssh.service) successfully established.
Feb 19 08:58:03 flukso-3755a7 daemon.info avahi-daemon[930]: Service "Web Server on flukso-3755a7" (/etc/avahi/services/http.service) successfully established.
Feb 19 08:58:03 flukso-3755a7 daemon.info avahi-daemon[930]: Service "Flukso RESTful API on flukso-3755a7" (/etc/avahi/services/flukso.service) successfully established.
Feb 19 08:58:04 flukso-3755a7 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Feb 19 08:58:04 flukso-3755a7 user.notice dnsmasq: found already running DHCP-server on interface 'eth0' refusing to start, use 'option force 1' to override
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: started, version 2.55 cachesize 150
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: using local addresses only for domain lan
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: reading /tmp/resolv.conf.auto
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: using nameserver 195.130.131.3#53
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: using nameserver 195.130.130.3#53
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: using local addresses only for domain lan
Feb 19 08:58:05 flukso-3755a7 daemon.info dnsmasq[973]: read /etc/hosts - 2 addresses
Feb 19 08:58:05 flukso-3755a7 user.info sysinit: using gpio pin 5
Feb 19 08:58:05 flukso-3755a7 user.info sysinit: using gpio pin 5
Feb 19 08:58:05 flukso-3755a7 user.info sysinit: using gpio pin 7
Feb 19 08:58:06 flukso-3755a7 user.info sysinit: Daemon returned 0 as return value.
Feb 19 08:58:06 flukso-3755a7 daemon.info spid[990]: Sucessfully started with DEAMON=spid and DAEMON_PATH=/var/run/spid
Feb 19 08:58:06 flukso-3755a7 user.info sysinit: Daemon returned 0 as return value.
Feb 19 08:58:06 flukso-3755a7 daemon.info fluksod[993]: Sucessfully started with DEAMON=fluksod and DAEMON_PATH=/var/run/fluksod
Feb 19 08:58:12 flukso-3755a7 user.info heartbeat[996]: POST https://api.flukso.net/device/3755a74d1f76220f240ce3f3f1b7e41b: 200
Feb 19 09:00:01 flukso-3755a7 cron.info crond[937]: crond: USER flukso pid 1027 cmd [ $(/usr/bin/fcheck; echo $?) -ne 0 ] && reboot
Feb 19 09:00:01 flukso-3755a7 cron.info crond[937]: crond: USER root pid 1028 cmd /usr/bin/fntp

Hi all,

Yesterday I installed my flm and everything seems to work fine. Yesterday evening I pulled out the power plug of the flukso for a few minutes to mount a new socket. After that, when the connection was established again, the curve showed during the power-off still 730 Watt consumption. How is that possible?

Bert